Karcher K 2500 HK, K 2400 HB, G 2400 HH TROUBLESHOOTING - continued, Missing/worn rubber washer

Models: G 2400 HH K 2400 HB K 2500 HK G 2400 HH, K 2400 HH, K 2400 HB, HD 2500 HK

1 12
Download 12 pages 19.83 Kb
Page 12
Image 12
TROUBLESHOOTING – continued

TROUBLESHOOTING – continued

 

 

Symptom

Cause

Solution

 

 

 

 

 

 

 

No detergent.

Detergent suction tube

Check connection.

 

 

 

not properly connected

 

 

 

 

to the machine.

 

 

 

 

Detergent is too thick.

Dilute detergent. For best results,

 

 

 

 

use Kärcher detergent.

 

 

 

 

 

 

 

 

Detergent filter valve is

Set detergent filter valve to a high-

 

 

 

at lowest setting.

er setting.

 

 

 

 

 

 

 

 

Filter on detergent suc-

Run warm water through filter to

 

 

 

tion tube is clogged.

remove debris.

 

 

 

 

 

 

 

 

Damaged or clogged

Remove obstruction or

 

 

 

detergent suction tube.

replace detergent suction tube.

 

 

 

 

 

 

 

 

A high pressure

Replace with black

 

 

 

nozzle is attached.

detergent nozzle.

 

 

 

 

 

 

 

 

Discharge nozzle

Blow out or remove debris

 

 

 

is obstructed.

with fine needle.

 

 

 

 

 

 

 

Garden hose

Loose fittings.

Tighten fittings.

 

 

connection leaks.

 

 

11

 

Missing/worn rubber washer.

Insert new washer.

 

 

 

 

 

 

 

 

 

Spray wand leaks.

Spray wand not properly

Slide the spray wand into the gun.

 

 

 

attached.

Turn the wand collar clockwise onto

 

 

 

 

the gun threads until tight.

 

 

 

 

 

 

 

 

Broken o-ring.

Call Kärcher customer service

 

 

 

 

hotline and order an o-ring.

 

 

 

 

 

 

 

Pump is noisy.

Pump is sucking air.

Check that hoses and fittings are

 

 

 

 

air tight. Turn off machine and

 

 

 

 

purge pump by squeezing trigger

 

 

 

 

gun until a steady flow of water

 

 

 

 

emerges through the nozzle.

 

 

 

 

 

 

 

Water leaks

Loose fittings.

Check that all fittings are tight.

 

 

from pump.

 

 

 

 

 

Water seals are

Call service center.

 

 

 

damaged or worn.

 

 

 

 

 

 

 

 

 

Thermal protection

Thermal protection

 

 

 

device is activated.

device will auto reset.

 

 

 

 

 

 

 

Oil Drip.

Oil seals are damaged

Call service center.

 

 

 

or worn.

 

 

 

 

 

 

In USA Call:

1-800-537-4129

or visit our website: www.karcher-usa.com

If you encounter any additional difficulties not listed, please call our service center for help.

Kärcher Customer Support USA

Page 12
Image 12
Karcher K 2500 HK, K 2400 HB, G 2400 HH specifications TROUBLESHOOTING - continued, Missing/worn rubber washer