Karcher HD 3000 Using The Accessories, Working With Detergents, For best results see Cleaning

HD3000 Manual 9/20/02 5:28 PM Page 6

USING THE ACCESSORIES

The five color-coded quick connect nozzles provide a wide array of spray widths from 0° to 65° and are easily accessible when placed in the convenient rubber nozzle holder, which is provided on the front of the machine.

WORKING WITH DETERGENTS

Detergents can only be applied with the black nozzle.

Red nozzle = 0°

Yellow nozzle = 15°

Green nozzle = 25°

White nozzle = 40°

5

Black detergent

nozzle

Dirtblaster® nozzle

This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This wand combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide angle nozzle.

Step 1 Install the black quick-connect low pressure nozzle for detergent application at low pressure.

Step 2 Adjust the dosage control at the beginning of the detergent tube for light (1), or maximum (6) detergent coverage.

Step 3 Fill a container with Kärcher detergent. Place the filter end of detergent suction tube into the detergent.

For best results see Cleaning
Tips on pages 8 & 9 for specific
information on how to clean
different surfaces.
Always Use Kärcher
Detergents for Best Results.
Kärcher biodegradable detergents are
specially formulated to protect the
environment and your pressure washer.
The special formula won’t clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
		6
life. For Kärcher Detergents, check your
retailer or call:
USA: 1-800-537-4129
www.karcher-usa.com
CAN: 1-800-465-4980
www.karcher.ca
The following Kärcher detergents
are available:
• Vehicle Wash	• House Wash
• Degreaser	• Deck Wash
• All Purpose Cleaner

Not recommended for soft materials, siding, painted surfaces, decks or autos.

WARNING

TO AVOID SERIOUS INJURY,

NEVER POINT SPRAY NOZZLE

AT YOURSELF, OTHER PER-

SONS OR ANIMALS.

Step 4 With the engine running, pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water.

Apply detergent to work area. Do not allow detergent to dry on surface.

Caution

Never use:

•Bleach, Chlorine products and other corrosive chemicals

•Liquids containing solvents

(i.e., paint thinners, gasoline, oils)

•Tri-sodium phosphate products

•Ammonia products

•Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.