![WORKING WITH DETERGENTS](/images/new-backgrounds/98718/9871813x1.webp)
WORKING WITH DETERGENTS
NOTE: Detergents can only be applied in the “CHEM” setting.
Step 1 To apply detergents the triple jet nozzel must be set to CHEM. position.
Step 2 Adjust the dosage control at the beginning of the detergent tube for light (1), or maximum (6) detergent coverage.
NOTE: Your pump may have a detergent control.
Step 3 Fill a container with Kärcher detergent. Place the filter end of detergent suction tube into the detergent.
For best results see Cleaning Tips on pages 8 & 9 for specific information on how to clean different surfaces.
Always Use Kärcher
Detergents for Best Results.
Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts
of the pressure washer for a longer life. 6 For Kärcher Detergents, check your
retailer or call:
In USA Call:
or visit our website:
The following Kärcher detergents are available:
• Vehicle Wash | • House Wash |
• Degreaser | • Deck Wash |
• All Purpose Cleaner |
|
Step 4 With the engine running, pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow detergent to dry on surface.
Caution
Never use:
•Bleach, Chlorine products and other corrosive chemicals
•Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
•
•Ammonia products
•
These chemicals will harm the unit and will damage the surface being cleaned.