JVC TM-H1375SU How To Initialise The Setting, Press the Power switch to turn the power OFF G

HOW TO INITIALISE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE

You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values.

1.Press the Power ( ) switch to turn the power OFF (G).

ON

OFF

POWER

2.While pressing both MENU button and PHASE ( ) button, press the Power ( ) switch to turn the

power ON (g).

The <SET-UP MENU> RESET screen is displayed.

* The screen automatically disappears when no operation is performed after about 5 minutes.

ON

OFF Note:

PHASE MENU POWER

The <SET-UP MENU> RESET screen will not be displayed if the MENU or PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears.

3. Setting

Initialisation is required.

		Press the CONTRAST ( ) button.
		* Initialisation is completed, and the <SET-UP MENU>
CONTRAST		RESET screen disappears.
Initialisation is not required.
–	+	Press the VOLUME/SELECT [+] or [–] button.
		* Initialisation is aborted, and the <SET-UP MENU>
VOLUME/SELECT		RESET screen disappears.

<SET-UP MENU> RESET screen

<SET–UP MENU> RESET

Are	you	sure ?
“Yes”	then	<CONTRAST>
“No”	then	<+> or <–>

Initial settings

Sorts		(setting)
	Functions (Items)	Initialisation
screen	SHARPNESS	00
<MENU>	COLOR TEMP.	6500
	COLOR SYSTEM	AUTO
	ASPECT RATIO	4–3
	H. POSITION	00
screen	V. POSITION	00
	R. CUT OFF	00
	WHITE BALANCE
MENU>	G. CUT OFF	00
	R. DRIVE	00
	B. CUT OFF	00
UP	B. DRIVE	00
	CONTROL LOCK	OFF
<SET-
	STATUS DISPLAY	ON
	INPUT REMOTE	OFF
	ASPECT REMOTE	OFF
adjustment	PHASE	00
	CHROMA	00
Picture	CONTRAST	00
	BRIGHT	00
Volume	VOLUME	20

11