Kenwood 440 MHz TH-D7A Partial Or Full Reset?, 1Press F+ POWER ON, 12VHF Band Defaults, Version

PARTIAL OR FULL RESET?

1If your transceiver seems to be malfunctioning,

1Press [F]+ POWER ON.

• “RESET?” appears.

2

3

initializing the transceiver may resolve the problem.

Use Full Reset to initialize all settings that you have customized. Partial (VFO) Reset does not initialize the

4 following settings:

5	Memory channels	Call channel
6
	DTMF channels	Memory channel lockout
7
	Power-ON message	Menu 3–1 ~ 3–6 (SSTV)

8Menu 2–1/ 2–3 ~ 2–8/ 2–A/ 2–B (APRS)

9Menu 4–1 ~ 4–3 (SKY CMD)(TH-D7A only)

10

Note: While using the Transceiver Lock function, you cannot perform

11Partial Reset nor Full Reset.

12VHF Band Defaults

13	Version	VFO Freq.	Freq.	Tone
14			Step Size	Freq.
15	TH-D7A	144.000 MHz	5 kHz	88.5 Hz
16
	TH-D7E	144.000 MHz	12.5 kHz	88.5 Hz
17
	UHF Band Defaults
18
19	Version	VFO Freq.	Freq.	Tone
20			Step Size	Freq.
21	TH-D7A	440.000 MHz	25 kHz	88.5 Hz
22	TH-D7E	430.000 MHz	25 kHz	88.5 Hz
23

•You can also use Menu 1–5–7 (TH-D7A) or Menu 1–5–9 (TH-D7E).

2Press [UP]/ [DWN] to select Partial (VFO) Reset or Full Reset.

3Press [OK].

• A confirmation message appears.

4Press [UP]/ [DWN] to select Yes (or No).

5Press [OK].

32