Kenwood 144, 440 MHz TH-D7A instruction manual VC-H1CONTROL

◆ If you have made no entry for superimposition, superimposition will not be executed.

Note:

VC-H1 CONTROL

1If you have another transceiver that has the Tone function, you can use it as a remote control for the

2VC-H1. Transmit a subaudible tone from the remote

3control to this transceiver connected with the VC-H1 for

4more than 1 second. Then this transceiver causes the VC-H1 to capture an image, executes the

5superimposition, and transmits the image to the target

6station. You must select the same tone frequency on

1Press [MENU] to enter Menu mode.

2Press [3], [9] to select “3–9 (VC SHUTTER)”.

STA CON PACKET96 BCONDUP

5 7 9

7

8

9

both transceivers; on this transceiver, program a CTCSS frequency {page 39}.

STA CON PACKET96 BCONDUP

5 7 9

10 ◆ “EXECUTING” appears and blinks on this transceiver while a series

11of operations is in progress.

12

13

14

15

16

17

18

19

20

21

22

23

4Press [OK] to complete the setting.

•Switching the function ON activates the CTCSS; “CT” appears.

5Press [MENU] to exit Menu mode.

The following table concludes the settings you must confirm:

TH-D7 and	The current frequency is the
remote control	same as the target station.
TH-D7 and	The tone frequencies match 1.
remote control
Remote control	The Tone function is ON.
VC-H1	The power is ON 2.

1For the TH-D7, use F–4 (CTCSS FREQ) {page 39}.

2The camera and LCD monitor must not be left ON.

60