Kenwood 440 MHz TH-D7A, 144 Entering Status Text, Press UP/ DWN to select a character

ENTERING STATUS TEXT

1You can also transmit any comment (status text) with the latitude/ longitude data. If you want, enter a desired

2comment using a maximum of 20 alphanumeric

3characters.

4Note: Attaching a long comment can double the size and length of the

5 Repeat steps 3 and 4 to enter up to 20 digits.

• Pressing [OK] after selecting the 20th digit completes

the programming.

• To complete programming a comment after entering less

than 20 digits, press [OK] twice.

• Each press of [ESC] causes the cursor to move

backward.

5

6

7

packet. Enter a comment only if necessary.

1 Press [MENU] to enter Menu mode.

2 Press [2], [6] to select “2–6 (STATUS TEXT)”.

• Pressing [A/B] deletes the digit at which the cursor is

blinking.

6 Press [MENU] to exit Menu mode.

8	• The display for entering a comment appears; the first
	digit blinks.
9

10	STA CON		96 BCONDUP
	7	9
5
11
12

13

14	3	Press [UP]/ [DWN] to select a character.
15		• You can enter alphanumeric characters plus special
16		ASCII characters.

174 Press [OK].

18• The cursor moves to the next digit.

19

20

21

22

23

You can also use the keypad to enter alphanumeric characters in step 3. For example, each press of [TNC] switches entry as A, B, C, a, b, c, then 2. Press [DUAL] to switch 0 and space. Press [ENT] to switch among the special ASCII characters.

70