Kenwood 440 MHz TH-D7A Quick Reference Guide, Function, Key Operation, Aip On/ Off, Menu, TH-D7E

QUICK REFERENCE GUIDE

Note: Not all functions are covered by this guide.

Function	Key Operation	Ref.
		Page
AIP ON/ OFF	[MENU], [1], [5], [6] ➡	51
(TH-D7A)	[UP]/ [DWN] ➡ [OK]
AIP ON/ OFF	[MENU], [1], [5], [8] ➡	51
(TH-D7E)	[UP]/ [DWN] ➡ [OK]
APO ON/ OFF	[MENU], [1], [2], [2] ➡	49
	[UP]/ [DWN] ➡ [OK]
Automatic Repeater	[MENU], [1], [5], [1] ➡	23
Offset ON/ OFF	[UP]/ [DWN] ➡ [OK]
ASC ON	[REV] (1 s)	24
Battery Saver	[MENU], [1], [2], [1] ➡	49
Interval Select	[UP]/ [DWN] ➡ [OK]
Beep ON/ OFF	[MENU], [1], [5], [3] ➡	47
	[UP]/ [DWN] ➡ [OK]
Channel Display	POWER OFF ➡	31
ON/ OFF	[A/B]+ POWER ON
Data Band Select	[MENU], [1], [4], [1] ➡	55
	[UP]/ [DWN] ➡ [OK]
Display Contrast	[MENU], [1], [1], [2] ➡	48
Adjust	[UP]/ [DWN] ➡ [OK]
Lamp Latch	[F], [LAMP]	48
ON/ OFF
Power-ON	[MENU], [1], [1], [1] ➡
	[UP]/ [DWN] ➡ [OK] ➡	50
Message Enter
	Enter up to 8 digits

Function	Key Operation		Ref.
			Page
	POWER OFF ➡
Reset (Partial/ Full)	[F]+ POWER ON ➡		32
	[UP]/ [DWN] ➡	[OK] ➡
	[UP]/ [DWN] ➡ [OK]
Scan Start
Call/Memory	Recall a memory channel		38
(TH-D7A only)	➡ [CALL] (1 s)
Call/VFO	Select band ➡ [VFO] ➡		38
(TH-D7A only)	[CALL] (1 s)
Memory	Select band ➡ [MR] (1 s)		35
MHz	Select band ➡ [VFO] ➡		36
	[MHz] (1 s)
VFO	Select band ➡ [VFO] (1 s)		35
Scan Resume	[MENU], [1], [5], [2] ➡		34
Method Select	[UP]/ [DWN] ➡	[OK]
Squelch Level	[F], [MONI] ➡		8
Adjust	[UP]/ [DWN] ➡	[OK]
Transceiver Lock
ON/ OFF	F (1 s)		50
Tuning Control	[MENU], [1], [5], [4] ➡		50
Enable	[UP]/ [DWN] ➡	[OK]
TX Deviation Switch	[MENU], [1], [5], [7] ➡		51
(TH-D7E only)	[UP]/ [DWN] ➡	[OK]
TX Inhibit ON/ OFF	[MENU], [1], [5], [5] ➡		51
	[UP]/ [DWN] ➡	[OK]

103