Kenwood 440 MHz TH-D7A, 144 instruction manual Keypad Direct Entry

KEYPAD DIRECT ENTRY

The keypad allows you to make various entries depending on which mode the transceiver is in.

In VFO or Memory Recall mode, use the keypad to select a frequency {page 45} or memory channel number {page 28}. Press [ENT] first.

In Menu mode, use the keypad to select a menu item. For example, pressing [1], [4], [1] in sequence selects Menu 1–4–1 (DATA BAND).

To manually send a DTMF number, press and hold the PTT switch, then press the keys on the keypad {page 41}.

You can also use the keypad to program a memory channel name {pages 29 and 42}, Power-ON message {page 50}, or other character strings. For example, each press of [TNC] switches entry as A, B, C, a, b, c, then 2. Press [DUAL] to switch 0 and space. Press [ENT] to switch among the special ASCII characters.

The selectable special characters are listed below:

?	!	’	.	,	–	/	&	#
(	)	<	>	;	:	"	@

Note: Pressing [UP]/ [DWN] allows you to select more special ASCII characters than above.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

15