JVC TM-H1375SU manual How To Handle Basic Operations, Picture Adjustment

HOW TO HANDLE BASIC OPERATIONS

BASIC OPERATION

1. Press the POWER switch to turn on the power.

STATUS indication (NTSC or PAL)

	gON : Power turns ON. (Power indicator: lit)	NTSC
ON	GOFF : Power turns OFF. (Power indicator: unlit)
OFF

POWER

2. Press the INPUT SELECT buttons to choose input.

BA

INPUT SELECT

Select video/audio signals input to terminals on the rear panel. The selected INPUT SELECT indicator lights in green.

INPUT	Terminals on the rear panel
SELECT
button	Video signal input	Audio signal input
1 Input A	VIDEO A terminal	AUDIO A terminal
(VIDEO)
2 Input B	VIDEO B terminal	AUDIO B terminal
(VIDEO /
	VIDEO B (Y/C) terminal
Y/C)

About the STATUS indication

With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the colour system indication appears for about

3 seconds on the screen while NTSC or PAL signals are being detected.

It does not appear when receiving a B/W signal or when no signal is input. Refer to page 8 for more information

*When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal is given priority.

3.Press the VOLUME/SELECT buttons to adjust the speaker volume.

–		+	Press this button to display the speaker volume level on the
			screen.
	VOLUME/SELECT		+ : The Built-in speaker volume is increased. (00 = 50)

–:The Built-in speaker volume is decreased. (50 = 00)

* Screen indication will disappear about 10 seconds after operating.

PICTURE ADJUSTMENT

1.Press select buttons corresponding to the item you want to adjust.

The item you select is displayed on the screen.

1	PHASE (	)	: Phase control
2	CHROMA (	)	: Chroma control
PHASE CHROMA BRIGHT CONTRAST 3	BRIGHT (	)	: Brightness control
4	CONTRAST (		) : Contrast control

2. Adjust with the VOLUME/SELECT buttons.

about COLOR SYSTEM setting and page 9 for more information about STATUS indication setting.

00 ~ 50

VOLUME : 20

– +

–40 ~ +40

PHASE : 00

– +

VOLUME/SELECT

Items	VOLUME/SELECT button
	–	+
PHASE	reddish	greenish
(Phase)
CHROMA	lighter	deeper
(Chroma)
BRIGHT	darker	brighter
(Brightness)
CONTRAST	lower	higher
(Contrast)

* Screen indication will disappear about 10 seconds after operating.

Notes:

Phase control is effective only in the NTSC color system mode.

Chroma control is not effective when receiving B/W or when no signal is input. (Except when a component signal is input.)

When CHROMA is adjusted to “–40,” the picture becomes less colourful. “NO EFFECT” is displayed (for about 3 seconds) when your selected function has no effect.

7