JVC TM-H1375SU manual Display and Selections in the SET-UP Menu Mode Setting, Function Contents

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

• H. POSITION	• CONTROL LOCK	• ASPECT REMOTE
• V. POSITION	• STATUS DISPLAY
• WHITE BALANCE	• INPUT REMOTE

Notes:

Parameters for H. POSITION and V. POSITION can be set separately depending on the video input (Input A (VIDEO) or Input B (VIDEO / Y/C)) selected by the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

WHITE BALANCE can be set individually at 6500 or 9300 for the colour temperature value.

Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.

<SET-UP MENU> screen

1<SET-UP MENU>

	‰	H. POSITION		:		00
		V. POSITION		:		00
		WHITE BALANCE
		CONTROL LOCK			: OFF
		STATUS DISPLAY			: ON
		INPUT REMOTE			: OFF
2		ASPECT REMOTE			:		OFF	3
			EXIT
						4

			–	+
PHASE	CHROMA BRIGHT CONTRAST	MENU	VOLUME/SELECT

1. While pressing the MENU button, press the

PHASE ( ) button.

	The <SET-UP MENU> screen is displayed.
	* The screen automatically disappears when no operation is
PHASE MENU	performed after about 5 minutes.

2.Press the PHASE ( ) or CHROMA ( ) button to select the desired menu item.

<Front panel buttons>

1Selection mark (3): Indicates the menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the

current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left) correspond to the function displayed.

PHASE CHROMA

H.POSITION V. POSITION

WHITE BALANCE CONTROL LOCK STATUS DISPLAY INPUT REMOTE ASPECT REMOTE

A selection mark (3) is put next to the selected item.

Front panel		Function	Contents
button		displayed
PHASE (	)	∞	Forward selection mark (3)
CHROMA (	)	5	Reverse selection mark (3)

Function	Contents
displayed
∞	Forward the menu item.
5	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
3	Forward the setting value.
2	Reverse the setting value.
	Exit the <SET-UP MENU>

3. Press the VOLUME/SELECT buttons to set.

–		+	Front panel	Function	Contents
			button	displayed
	VOLUME/SELECT		VOLUME/	+	Increase (to max. value)
				3	Forward the setting value
			SELECT (+)
				CUTO	Selects CUT OFF setting screen
			VOLUME/	–	Decrease (to min. value)
				2	Reverse the setting value
			SELECT (–)
				DRV	Selects DRIVE setting screen

Notes:

For the WHITE BALANCE setting, select the CUT OFF or DRIVE setting screen, then select the buttons (PHASE/ CHROMA/BRIGHT) corresponding to the function indicated (R/G/B).

Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

EXIT	screen. (release)
DRV	Selects DRV adjustment.
CUTO	Selects CUT OFF
	adjustment.
R	Adjusts red signal level.
G	Adjusts green signal level.
B	Adjusts blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

9