Samsung SDR5100, SDR4100 user manual Preset Setting, Camera Setting

main menu

Preset Setting

A preset is a set of specific target points of a PTZ camera, and up to 127 presets per a camera can be stored.

1.In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.

2.Select the <Save> key.

The virtual keyboard for inputting the preset will appear.

`Refer to “Using Virtual Keyboard”. (Page 36)

•Save : You can save the preset settings.

•Rename : You can change the settings of the existing presets.

•Delete : Deletes the selected preset.

•Delete All : Deletes all existing presets.

M ` If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset accordingly.

3.Press <OK>.

The preset will be saved as a name that you entered.

Camera Setting

A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.

1.	Connect the PTZ camera to the DVR and run the PTZ	2012-01-01 01:10:25
	camera again to display the camera’s protocol setting
2.	window.	SAMSUNG PROTOCOL
	Check the protocol ID of the camera.	ADDR	0
	` In “Device > Setting the PTZ”, enter the PTZ camera ID in the	BAUD	9600
	ID input box of the channel that is connected to the PTZ camera.	TYPE	RS-485,HALF
		LENS	OK!
	(Page 47)	TILT	OK!
		PAN	OK!

3.Select <Camera Setup> in the PTZ Control menu. The camera-specific menu appears.

`You can configure the settings of only those cameras that support the protocols of Samsung, Pelco D/P, AD and Panasonic.

`If you are setting Auto Pan or Pattern in the camera menu, press and hold the appropriate button for a certain time so that the button operation can be different from that in normal PTZ setting.

	2012-01-01 01:10:25
** MAIN MENU **
	CAMERA SET...
	VIDEO SET...
	PRESET...
Camera Setup	ZONE SET...
	AUTO SET...
	ALARM SET...
	OTHER SET...
	CLOCK SET...
Exit	SYSTEM INFO...

74_ main menu