Zoom MRT-3 operation manual Getting Connected, Connection Example

Getting Connected

Connection Example 1

For mono playback, connect a mono cable to the [OUTPUT MONO] jack.

AC adapter

To monitor the sound with headphones, plug the phones into the [OUTPUT STEREO/PHONES] jack.

Headphones

If you connect the optional FS01 foot switch FS01 to the

[FOOT SW] jack, you can control start/stop and switch

the sound of the MRT-3 with your foot.

For stereo playback, connect a Y cable to the [OUTPUT STEREO/PHONES] jack and plug the other end of the cable into the L/R channel inputs of an audio system or two channels of a mixer assigned to left and right positions.

Monitor system

Getting Connected

Connection Example 2

	To synchronize the unit with a MIDI
	sequencer/recorder that has a MIDI
	clock output, connect a MIDI cable
	from the MIDI OUT connector of
	the device to the [MIDI IN]
	connector of the MRT-3.
AUX IN	MIDI OUT

MRS-4

ZOOM MRT-3 7