Returning the MRT-3 to the Factory Default Condition

You can return all stored data and settings of the MRT-3 to the factory default condition. This is called initialization.

NOTE

Use this function with care. Initialization will clear all user pattern data, user kit data, and song data that you have created.

1.Hold down the [REC] key while turning power to the MRT-3 on.

The display shows "Init".

IN T

2.To carry out the initialization process, press the [REC] key once more. To cancel the operation, press the [STOP] key.

When initialization is performed, all data and settings of the MRT-3 will return to the factory default condition, and the unit will restart.

If the operation is canceled, the unit comes on normally. OtherFunctions

ZOOM MRT-3 49

Page 49
Image 49
Zoom Returning the MRT-3 to the Factory Default Condition, Hold down the REC key while turning power to the MRT-3 on