Zoom MRT-3 05P, 51@, Copying a Kit, Kit mode, select the kit to be used as copy source

Creating Your Own Kit (Kit Mode)

Copying a Kit

A kit of the MRT-3 (preset kit or user kit) can be copied to any other user kit number (51 – 70). This is useful for example when wishing to change only a part of a kit.

1.In kit mode, select the kit to be used as copy source.

The copy source can be either a user kit or a preset kit.

Copy source kit number

05P

2.Press the [INSERT/COPY] key.

The [INSERT/COPY] key flashes and the current kit is selected as copy source. When the copy source is a user kit, the indication "CoPy" flashes on the display.

COPY

When the copy source is a preset kit, the user kit "51U" is selected as default target, and the number flashes on the display.

51@

3.Use the [VALUE +/-] keys to select a user kit (U51 – U70) as copy target.

Only user kits can be selected as copy targets.

NOTE

•When the copy is executed, the existing contents of the user kit selected as copy target will be erased. Make sure that the kit you have selected is one that you don't mind erasing.

•When the copy source is a user kit, the same kit is first selected after step 2. However, it is not possible to copy a kit onto itself.

30 ZOOM MRT-3