Other Functions

Setting the Precount for Real-Time Recording

The MRT-3 can perform a countdown before the start of real-time recording. The number of precount measures can be changed, and precount can also be turned off. This setting affects all patterns.

1.In pattern mode, press the [FUNCTION] key and then pad 2 (PRE COUNT).

The current precount setting is shown on the display (default setting: 1).

1

2.Use the [VALUE +/-] keys to select one of the following settings.

0:No precount

1:Precount of 1 measure

2:Precount of 2 measures

PAd: Recording starts when any pad is hit.

HINT

When "PAd" is selected, holding down the [REC] key while pressing the [PLAY] key in pattern mode brings up the indication "rEAdy" on the display, and the unit goes into recording standby mode.

3.When the setting is complete, press the [FUNCTION] key again.

The unit returns to the previous mode.

48 ZOOM MRT-3

Page 48
Image 48
Zoom MRT-3 operation manual Setting the Precount for Real-Time Recording