Zoom MRT-3 operation manual A05, @05, Copying a Pattern

4.Press the [FUNCTION] key.

The pattern beat is changed.

Copying a Pattern

The currently selected pattern (user pattern or preset pattern) can be copied to any other user pattern number. This is useful for example when wishing to change only a part of a pattern, or to add a fill-in phrase.

1.In pattern mode, select the pattern to be used as copy source.

The copy source can be either a preset pattern or a user pattern, but an empty user pattern (where "E" is shown on the right side of the display) cannot be selected as copy source.

Copy source pattern number

A05

2.Press the [INSERT/COPY] key.

The [INSERT/COPY] key flashes and the current pattern is selected as copy source. When the copy source is a user pattern, the indication "CoPy" flashes on the display.

COPY

When the copy source is a preset pattern, a user pattern with the same number as the source is selected and flashes.

@05

3.Use the [VALUE +/-] keys to select a user pattern (U01 – U99) as copy target.

Only user patterns can be selected as copy targets.

Using Patterns (Pattern Mode)

ZOOM MRT-3 23