Zoom MRT-3 Changing the User Pattern Beat, Use the Value +/- keys to set the new bar length

Using Patterns (Pattern Mode)

2

3.Use the [VALUE +/-] keys to set the new bar length.

The bar length (number of measures) can be set in the range from 1 – 99.

4.Press the [FUNCTION] key.

The pattern length is changed. When a recorded pattern was made shorter, the excess measures at the end of the pattern will be cut off. When a recorded pattern was made longer, blank measures will be added at the end of the pattern.

Changing the User Pattern Beat

The beat (time signature) of an empty user pattern can be changed as follows.

1.Select the user pattern whose beat you want to change.

2.Press the [FUNCTION] key and then pad 1 (TIME SIG).

The beat of the user pattern selected in step 1 is shown.

4

3.Use the [VALUE +/-] keys to set the new beat.

The available settings for the beat are as follows: 2 (2/4), 3 (3/4), 4 (4/4), 5 (5/4), 6 (6/4), 7(7/4).

22 ZOOM MRT-3