Zoom MRT-3 operation manual Pat, Selecting a Dedicated Song Kit, Hold down the Function key

Creating Songs (Song Mode)

4.Hold down the [FUNCTION] key.

While the [FUNCTION] key is being pressed, the volume change information for that step is shown on the display. If no volume information is stored for that step, the indication is "---".

---

5.While holding down the [FUNCTION] key, use the [VALUE +/-] keys to set the volume value (0 – 63).

60

6.If desired, set the volume for other song steps as well by repeating steps 3 – 5.

7.When you have completed the volume change input, press the [STOP] key.

NOTE

It is not possible to record both tempo change information and volume change information in the same step. The most recently made setting will be valid.

Selecting a Dedicated Song Kit

Unless specified otherwise, the kits stored for the respective patterns will be used during playback of a song. (When the pattern is switched, the kit is also switched.) It is also possible to specify a dedicated song kit so that this kit will be used for the entire song.

1.In song mode, select the song for which you want to specify a kit.

2.Press the [FUNCTION] key and then the [KIT] key.

The kit number for that song is shown on the display. The default setting is "Pat", which means that the kit selected for the respective pattern will be used.

PAT

3.Use the [VALUE +/-] keys to select a dedicated kit for that song.

05P

4.When you have selected the kit, press the [FUNCTION] key.

38 ZOOM MRT-3