Zoom MRT-3 operation manual 01-3, 112, 114, Changing the Tempo of Pattern Playback

4.Press the [PLAY] key.

The [PLAY] key lights up and the pattern is played repeatedly. During playback, the [TEMPO] key flashes in sync with the tempo. The display shows the current position in the pattern (measure/beat).

Measure Beat

01-3

HINT

•While a pattern is playing, you can also manually play the pads.

•While a pattern is playing, you can also switch to a different bank and pattern number. The new pattern will begin playing as soon as you switch to it.

5.To stop pattern playback, press the [STOP] key.

If you press the [PLAY] key instead of the [STOP] key, the unit goes into pause mode, and the [PLAY] key flashes. If you press the [PLAY] key again in this condition, playback resumes from the same position.

Changing the Tempo of Pattern Playback

In pattern mode, you can adjust the play tempo in the range of 40 – 250 BPM (quarter note beats per minute).

1.Press and hold the [TEMPO] key.

The [TEMPO] key lights up and the current tempo is shown on the display.

Tempo value (BPM)

112

2.While keeping the [TEMPO] key depressed, use the [VALUE +/-] keys to adjust the tempo.

114

Using Patterns (Pattern Mode)

ZOOM MRT-3 15