Other Functions

Playing MRT-3 Sounds From an External MIDI Component

Using an external MIDI sequencer or MIDI keyboard, you can play the sound sources of the MRT-3. To do this, the MIDI receive channel setting of the MRT-3 must match the MIDI send channel of the external device.

1.Connect the MIDI OUT jack of the MIDI sequencer or similar to the [MIDI IN] connector of the MRT-3, using a MIDI cable.

 

 

 

 

 

 

 

 

 

 

MIDI OUT

 

MIDI IN

MIDI sequencer

 

 

MRT-3

 

 

 

 

 

2.In pattern mode, press the [FUNCTION] key and then pad 6 (MIDI).

The clock currently used by the MRT-3 is shown on the display.

INT

3.Press and hold the [KIT] key.

While the [KIT] key is being pressed, the display shows the current MIDI receive channel setting (default setting: 10).

10

4.Use the [VALUE +/-] keys to select the MIDI receive channel.

The MIDI receive channel can be set to OFF (no MIDI messages are received), or 1 – 16.

1

5.When the setting is complete, press the [FUNCTION] key again.

The unit returns to the previous mode.

46 ZOOM MRT-3

Page 46
Image 46
Zoom operation manual Int, Playing MRT-3 Sounds From an External Midi Component, Press and hold the KIT key