Samsung SDR5100 Date Sets the date that will appear on the screen, You can select the date format

main menu

• Date : Sets the date that will appear on the screen.
		Date/Time/Language
You can select the date format.
	Date/Time/Language						Holiday
• Time : Sets the time and its format that will appear on the
		 Date
				2012-01-01				YYYY-MM-DD
screen.
Select either one from <24 Hours, 12 Hours (am/Pm)>.
			Time Zone	GMT
			Time	08:14:24				24 Hours
• Time Zone : Sets the time zone of your area based on the			DST		Dec First (Sun) 0				Dec First (Sun) 0
			Time Sync.	Setup
Greenwich Mean Time (GMT).
` GMT (Greenwich Mean Time) is standard World Time and the basis		 Language
				English
of world time zone.
							OK	Cancel
• Time Sync. : You can set the DVR’s current time synchronized
to a selected <Time Server> regularly if you select to use <Time Server>.
In this case, <Date/Time/Language> setup does not allow time adjustment.
- Time Server : Enter an IP or URL address of the time
		Date/Time/Language
server.
	Date/Time/Language						Holiday
- Last Sync Time : Displays the most recent synchronization
			Time Synchronization Setup
time from the selected time server.
			 Synchronization			Use
- Activate as Server : Set to <use> to allow the DVR to act			Time Sync.	Setup		Not Used		24 Hours
			Time	08:14:24
			 Time Server			203.248.240.103
as a Time Server for other DVRs.			Time Zone	GMT+08:00					Dec First (Sun) 0H
			DST		Dec First (Sun) 0H
			 Last Sync Time							Fail
			 Activate as Server			Use
• DST : Set up Daylight Saving Time with its period to make							OK	Cancel
the time earlier than the GMT of its time zone by 1 hour		
			Language	English
during the set period.
							OK	Cancel
• Language : Select your language. Sets the language for the
interface.
English, French, German, Spanish, Italian, Chinese, Russian, Korean, Polish, Japanese, Dutch, Portuguese,
Turkish, Czech, Danish, Swedish, Thai, Romanian, Serbian, Croatian, Hungarian and Greek are available.

6.When the Date/Time/Language setup is done, press <OK>.

M ` You can also use numeric buttons on the remote control to enter values for Date, Time and other numeric fields.

34_ main menu