Samsung SDR5100 Monitor, Setting the monitor, Setting Display position, Setting the Screen mode

main menu

monitor
You can configure information to be displayed.
Setting the monitor
Using the mouse may help make setup easier.
1.	Use the up/down buttons ($%) in <Device> window to	Monitor
		Monitor	Mode
	move to <monitor>, and press [enTeR] button.
		 Event Display	OFF
2.	Select <monitor>.
		 Display	Date	Time	CH Name Icon
		 Multi CH SEQ Time
			5 sec
3.	Use direction buttons ($%_ +) to move to a desired
		 VGA/HDMI	1280x1024
	item, and set the value.
• Event Display : Sets the dwell time of the event channel
	display on the monitor when an event occurs.	Display Position Setup
	If selected <Continuous>, it displays the channel until you
			OK	Cancel
	press [aLaRm] button to release it.
• Display : Displays only checked items on the monitor screen.
•	Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of
	the Live screen.

• VGA/HDMI : Set your preferred screen resolution to <VGa> or <HDmi>.

If the monitor does not support selected resolution of <VGa> or <HDmi>, it may not display video properly. When the monitor setup is done, press <OK>.

Setting Display position

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data.

1.In the <Device> window, press the up/down ($%) button

to move to <monitor> and press the [enTeR] button. 2012-01-01 01:10:25

2.	Select the <monitor> item.	Display Position Setup
3.	Select <Display Position Setup> in the bottom.		30
	You will move to the <Display Position Setup> window.	30	30
4.
	Use the four direction buttons or the number buttons on		30
		OK	Cancel
	the remote control to adjust the data position.

Setting the Screen mode

You can configure the Live screen and Split Screens.

1.Use the up/down buttons ($%) in <Device> window to move to <monitor>, and press [enTeR] button.

2.Select <mode>.

3.Use direction buttons ($%_ +) to move to a desired item, and set the value.

•Live Screen : Select split modes for the Live screen.

16-, 9-, and 4-split screens are included by default. SDR-4100 doesn't support 16-split screen mode.

•Play Screen : Select split modes for the playback screen. Only the 13-split screen is optional.

Black shows the playback while white shows the Live screen.

4.When the screen mode setup is done, press <OK>.

Monitor

Monitor

Live Screen

Play Screen

Mode

LivePlay

OK Cancel

50_ main menu