Samsung SDR5100, SDR4100 To set the privacy region, When the camera setup is done, press OK

Clear All

Menu

main menu

•Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences.

Select a channel and adjust the < (Brightness)>,

< (Contrast)>, and <(Color)> of the selected channel. ` Press the <init> to initialize settings back to the default 50.

•Privacy Region : You can specify a certain area of the camera video to be protected for your privacy.

6.When the camera setup is done, press <OK>.

Screen Setup
CH1	50	50	50	Init	Apply to All CH
		OK		Cancel

To set the privacy region

① Select <Privacy Region>.

② When “Privacy Region” window appears, select a channel for detection and set the area of motion detection.

• To set the area in “Privacy Region” window

In the “Privacy Region” window, select desired region
from <	>.

•Privacy Region

You can specify up to 4 privacy zones for each channel, which can be identified by the color.

1 Purple 2 Green 3 Blue 4 Yellow

Privacy Region

CH1

Privacy Region1

Individual Apply to All CH

OK Cancel

• To set the area using <individual> selection

When selected <individual>, “Privacy Region” window disappears and you can select cells one by one. When the motion area setup is done, Right-click to select <menu> in the context menu or the [menu] button on the remote control to display the “Privacy Region” window again.

- Clear All : Selected cell is removed from the Privacy Region.

- Menu : After selecting individual motion areas, move to the “Privacy Region” window.

` If selected <Apply to All CH>, selected motion area is applied to all channels.

③ When completing the privacy zone settings, click <OK>.

46_ main menu