Samsung SDR4100, SDR5100 user manual Remote Devices, HDD alarm

HDD alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,
and its duration.
Using the mouse may help make setup easier.
1. Use the up/down buttons ($%) in <Device> window to
	Storage Device
move to <Storage Device>, and press [enTeR] button.
		Device	Format		HDD Alarm
2. Select <HDD alarm>.
		 Check Alarm Output Port		BEEP
A window for setting HDD check and replace output ports
		 Duration		OFF
and their durations appears.
		 Replace Alarm Output Port		BEEP
3. Use direction buttons ($%_ +) to move to the desired		 Duration
				OFF
item.
• Alarm
				OK Cancel
- If <BeeP> was selected, a beep will sound.

•Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

•Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port.

•Duration : Sets the alarm duration for the alarm signal and beep sound.

M ` <Check> status means that the HDD is operating but it has problems that require technical examination.

( ) appears on the Live screen.

`<Replace> status means that the HDD has defect and requires immediate replacement.

( ) appears on the Live screen.

4.When the HDD Alarm setup is done, press <OK>.

Remote Devices

You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR. Using the mouse may help make setup easier.

1.

Use the up/down buttons ($%) in <Device> window to

Remote Device

2.

move to <Remote Device>, and press [enTeR] button.

Use direction buttons ($%_ +) to move to the desired

9600



None



8



1



Half Duplex

Baudrate

Parity

Data

Stop Bit

Transfer type

item, and press [enTeR] button.

System Keyboard

ID

3.

OFF

1

Set the values of each communication setup of the remote

Remote Control

ID

ON

0

device.

•Baudrate : Baud rate settings of the DVR, PTZ camera and system keyboard should be matched for proper operations.

4. Specify the system keyboard and remote control ID, and	OK Cancel
click <OK>.

M ` For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 14)

!main menu

English _49