Samsung SDR4100, SDR5100 ReC Quality & Resolution, Setting Standard Recording Properties

ReC Quality & Resolution

You can set resolution, FPS and quality of recordings by channel, and by recording type of standard / event.

Setting Standard Recording Properties

You can set each channel’s resolution, quality and fps for normal recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons ($%) in <Record> window to
		REC Quality & Resolution
	move to <ReC Quality & Resolution>, and press
		Standard		Event
	[enTeR] button.
		Remaining count : 4CIF(L) : 8				2CIF(M) : 16		CIF(S) : 32
		CH	Resolution 			Record Rate 		Record Quality 
2.	Select <Standard>.
		1	CIF(S)			7fps		Level4	
		2	CIF(S)			7fps		Level4	
3.	When the recording setup is done, press <OK>.	3	CIF(S)			7fps		Level4	
		4	CIF(S)			7fps		Level4	
		5	CIF(S)			7fps		Level4	
		6	CIF(S)			7fps		Level4	
		7	CIF(S)			7fps		Level4	
		8	CIF(S)			7fps		Level4	
								Previous/Next Page
						OK Cancel

Setting event Recording Properties

You can set each channel’s resolution, quality and fps for event recordings.
Using the mouse may help make setup easier.
1.	Use the up/down buttons ($%) in <Record> window to
		REC Quality & Resolution
	move to <ReC Quality & Resolution>, and press
		Standard		Event
		Remaining count : 4CIF(L) : 8				2CIF(M) : 16			CIF(S) : 32
	[enTeR] button.
		CH	Resolution 				Record Rate 		Record Quality 
2.	Select <event>.
		1	4CIF(L)				7fps		Level4	
		2	4CIF(L)				7fps		Level4	
		3	4CIF(L)				7fps		Level4	
	Event recording setup window appears.
		4	4CIF(L)				7fps		Level4	
		5	4CIF(L)				7fps		Level4	
3. Use direction buttons ($%_ +) to move to a desired		6	4CIF(L)				7fps		Level4	
		7	4CIF(L)				7fps		Level4	
		8	4CIF(L)				7fps		Level4	
	item, and select it.
									Previous/Next Page
• Resolution : Sets the resolution of the recorded screen.
						OK	Cancel
• Record Rate : Frames recorded per second.

•Record Quality : Sets the recording quality.

M	` The estimated total remaining count means the total number of remaining recordings for both standard and event
	recordings.

`You cannot increase the remaining count if the current remaining count has reached zero or there is no available remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so for the same channel on any other page.

4.When the Event recording setup is done, press <OK>.

!main menu

English _53