SHUTTING DOWN & CLEAN-UP
Step 1 | Remove deter- | Step 2 | Turn | Step 3 | Slide |
gent suction tube from con- | off the engine. | fuel valve to the | |||
tainer and insert into one gallon |
|
| off position. |
| |
of fresh water. Siphon water at |
|
|
|
| |
low pressure for one minute. |
|
|
|
| |
7
Step 5 Press | Step 6 Disconnect | Step 7 Disconnect |
trigger to release | garden hose from water | high pressure hose from |
water pressure. | inlet on the unit. | high pressure outlet. |
Step 4 Turn
off water supply.
Step 8
Engage the gun safety lock.
TAKING A BREAK... five minutes or more
Step 1 Turn off | Step 2 Slide | Step 3 Press | Step 4 Engage |
the engine. | fuel valve to the | trigger to release | gun safety lock. |
| off position. | water pressure. |
|
WINTERIZING AND LONG-TERM STORAGE
1.Disconnect all water connections.
2.Start the machine for a few seconds, until the remaining water exits.
Turn off immediately.
3.Drain the gas and oil from the engine.
4.Do not allow high pressure hose to become kinked.
5.Store the machine and accessories in a room which does not reach freezing temperatures.
Caution: Failure to follow the above
directions will result in damage to the pump assembly and accessories.
