33
KMR 1550 B Operating instructions for users English
Cleaning and care Before you carry out any cleaning or general maintenance tasks,
nPark the sweeper and switch off the engine.
Cleaning the inside of the sweeper:
You can clean out the inner parts of the sweeper by blowing them through
with compressed air.
Cleaning the outside of the sweeper:
The outside of the sweeper can be wiped off with a damp cloth. Do not use
any aggressive cleaning agents which might cause damage to the plastic
components.
Maintenance First engine oil change
Caution!
When an engine is new, it is subject to increased abrasion. In order that the
engine does not suffer any damage, we recommend that you change the
engine oil and the oil filter after the first 8 operating hours.
Initial inspection after 8 operating hours
Caution!
In order to ensure that your sweeper functions safely and reliably, it should
undergo an initial inspection after approx. 8 operating hours. The inspection
should be carried out by an authorised service agent.
nInspect all Bowden cables and adjust them if necessary.
nReplace the hydraulic fluid filter.
nChange the engine oil.
nCheck that no hydraulic components are leaking and that they all function
correctly.
nCheck that the handbrake functions correctly.
nCheck the tyre pressure (specified value: 8 bar)
Daily maintenance
nCheck the engine oil level.
nCheck the hydraulic fluid level and top up if required.
nCheck the tyre pressure (specified value: 8 bar).
nInspect the brush roller for string, rope, etc. which may have been caught
up and remove it if necessary.
nInspect the dust filter and if it is very dirty, shake it clean.
nEmpty the dirt container.
Maintenance intervals
Keep to the service intervals set out in the maintenance booklet so that your
sweeper functions reliably and you retain the full benefit of the warranty.
The maintenance booklet 5.950-047 can be found in the tool compartment on
the sweeper (under the bonnet).
The necessary maintenance tasks should be carried out by an authorised
service agent.
Safety information applicable to maintenance tasks
Caution!
Before you begin any maintenance tasks, please read the enclosed leaflet
Safety Information No. 5.956-250.