28
English Operating instructions for users KMR 1550 B
Preparing thesweeper for useAll directions given (left/right, front/rear) are as seen from the driver’s seat.
nCheck the oil level in the engine (see Chapter: “Maintenance”).
nCheck the level of coolant in the radiator (see Chapter: “Maintenance”).
nCheck the amount of fuel in the tank and fill up, if required (see below).
nCheck the level of hydraulic fluid and top up, if required (see Chapter:
“Maintenance”).
nCheck the air pressure in the tyres (see Chapter: “Maintenance”).
nInspect the brush roller and remove any string, rope, etc., that may be
caught up in the brushes.
nCheck the dust filter. If it is very dirty, operate the shaker to clean it off .
nEmpty the waste container.
Adjusting the driver’s seat
The driver’s seat can be adjusted to fit people of different sizes.
nPull the lever outwards.
nAdjust the seat position and release the lever.
nMove the seat back and forth to ensure that it has locked in position.
Filling the fuel tank
Explosion hazard while refuelling!
nDo not fill up with fuel
– in an enclosed space
– while the engine is running.
nDo not smoke while refuelling the vehicle.
nFuel expands as it becomes warmer.
Do not fill the tank right up to the top. Leave a gap of at least 1 cm under
the bottom edge of the filler neck.
nWipe up any fuel they may have been spilt and ensure that the cap is
replaced firmly on the tank.
Opening the fuel tap
nOpen up the bonnet and make sure it locks in position.
nOpen the fuel tap.
OPEN = Knob turned so that it is parallel to fuel pipe
nClose the bonnet.
+-
Adjusting r.p.m. of side brush
nA clockwise turn reduces the r.p.m. of the side brush.
nA counterclockwise turn increases the r.p.m. of the side brush.