35
KMR 1550 B Operating instructions for users English
Disconnecting the battery
nSlide the seat forwards and tilt it towards the front.
nUse an open-jawed spanner (size 10 mm) to first of all loosen the clamp
on the negative terminal ( – ) and then pull it off. Repeat the procedure for
the positive terminal ( + ).
nReconnect the battery by first of all attaching the clamp on the positive
terminal ( + ) and then the clamp on the negative terminal ( – ).
Opening/closing the bonnet
nPull the section of panelling upwards and unscrew the knob on the inside
of the bonnet.
nRaise the bonnet towards the front until it automatically locks in position.
nLift the rod up slightly and close the bonnet.
nScrew the knurled knob back into the inside of the bonnet.
Tool compartment and sweeper tool kit
nThere is a tool compartment under the bonnet. This compartment contains
the tools required to carry out routine maintenance tasks.
Checking tyre pressure
nPark the sweeper on a level surface.
nCheck the tyre pressure and make any necessary corrections.
Air pressure for front and rear wheels = 8 bar.