![](/images/new-backgrounds/1261165/26116511x1.webp)
_____________________________________________________________
Mast installation and mast calculation (Fig. 1)
-Make sure that the mast is in vertical position when mounting it
-Only use masts or standpipes specially designed for antenna installation. Other tubes mostly do not have the necessary stability to withstand heavy wind or other climatical situations.
Find an overview of the masts provided by Kathrein on the last page
-The clampling range of the mast clamp of the OLYMPIA antennas is from 22 mm to 60 mm
-If the mast is to be mounted on a roof, you have to clamp at least 1/6 of its length
-Mind that the mast holders (e.g. clamps) are mounted on solid ground (wood, concrete, walls)
| Installing several antennas on one mast |
| |
Never exeed the maximum load capacity of the mast or clamps | Fig. 1 | ||
when mounting several antennas on one mast. | |||
|
Antenna installation (Fig. 2)
1.If necessary, plug together the antenna parts, and fix them using wing screws.
2.Fix the dipole with cable connection box on the antenna square pipe using a knurled screw.
3.Open the reflector grille and fix it with the wing screws through the antenna square pipe.
4.Open the mast clamp and fix the antenna on the mast. Slightly screw the wing nuts on the mast clamp so that you are able to align the antenna to optimum reception.
Fig. 2
936.2595/B/1104/2.4e