SERVICE MENU
Select the “Service” menu using the menu button , the buttons on the main menu and . The following display appears:
Current software version
Hardware version
Date of the channel list
Last update run
UPDATE SOFTWARE
The receiver checks in standby mode whether a new software version is available and, if it is, displays the following message the next time the receiver is started up:
Use the buttons to select from the displayed options and press to confirm your selection:
• “Load in standby”: When the receiver is switched to standby mode the new software is loaded
• “Remind later”: The message reappears the next time the receiver is started up
• “Don’t load”: The software is not loaded and the download must be launched manually. To load the software manually:
Use the buttons to switch to “Software Update” and then press . The following display appears (next page):
69
