SERVICE MENU

Also pay attention to the bars at the bottom of the on- screen display! These provide information on what to do next.

Update Software

If new software is available (but only then), use the  buttons (No/Yes) to select whether you wish to load the new software that is available. If you are unsure whether you wish to load the new software, you can initially set the reply to “No”. If you do agree to the changes, you can then proceed to download the software.

Channel List

Select the required activity using the  buttons. Available options:

-“only update”: Your existing list will only be updated, any new channels found will be added at the end of the channel list. The sort sequence of your channel list remains unchanged; the only change is that the channel data (transmission frequency etc.) are updated.

-“no download”: Your existing list will not be edited (nor updated nor overwritten).

-“overwrite”: Your existing channel list will be completely superseded by a new list of available channels. Your personal channel sorting will be lost. If you select “overwrite”, you will additionally

see displayed the line “pre-sorted for”. Use the  buttons to switch to this line and use

the  buttons to select the desired pre-sorting. Your available options are for instance Germany and Austria.

70

Page 70
Image 70
Kathrein UFS 700sw, UFS 700si manual Update Software, Channel List