Do not disassemble, repair or modify the product.
When disconnecting the AC power cord's plug, always hold the plug
and pull it to remove it.
The product is not completely disconnected from the power supply even when the power switch is turned off. If the product will not be used for a long time, unplug the AC power cord from the AC outlet.
Doing so may result in product breakdown, electric shock or
●Pulling the AC power cord itself may damage the cord, causing a fire, electric shock or
●Failure to do so may cause fire in case of lightning.
●Failure to do so may
This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
It is a good practice to have the instrument near the AC outlet and the power cord plug in a position so that it can readily be disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a power switch off condition.
Indicates a potential hazard that could result in injury
CAUTION or damage to the product or other
Do not use the product in the following areas.
●Areas, such as those near windows, where the product is exposed to direct sunlight
●Extremely hot areas, such as near a heater
●Extremely cold areas, such as outside
●Extremely humid areas
●Areas where a large amount of sand or dust is present
●Areas where the product is exposed to excessive vibrations
Using the product in such areas may result in product breakdown.
Use the product only in moderate climates (not in tropical climates).
Before connecting cords, make sure | OFF | Failure to do so may cause breakdown of this |
that the power to this product |
| product and other devices. |
and other devices is turned |
|
|
OFF. |
|
|
Take care not to allow any foreign matter to enter the product.
Do not drag the product on the floor. Take care not to drop the product.
Do not place the product near electrical appliances such as TVs and
radios.
When connecting the AC power cord and other cords, take care
not to get them tangled.
Do not wipe the product with benzene or thinner.
Entry of water, needles or hair pins may result in breakdown or
The product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.
Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons. Dropping the product may result in breakdown.
● Doing so may cause the product to generate noise.
● If the product generates noise, move the product sufficiently away from the electrical appliance or connect it to another AC outlet.
Failure to do so may damage them, resulting in 
fire, electric shock or
● Doing so may result in discoloration or deformation of the product.
●When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product.
– 4 –
