INSTALLATION HARDWARE
NO. | NAME OF PARTS | Q'TY | |
t | Curtain |
| 1 |
2 | Curtain Frame | 1 | |
3 | Upper Guide | 1 | |
4 | Side Guide | 2 | |
5 | Support | Bracket | 1 |
8 | Bracket |
| t |
7 | LeveIing | bott & nut | t |
8 | Bolt |
| 2 |
9 | Nut |
| 2 |
I0 | Washer |
| 2 |
11 | Side Guide seaI | 1 | |
t2 | Foam Seat Strip | t | |
t3 | Window | Track Seat | t |
t4 | L Bracket | t | |
t5 | Screw (Type A) | 9 | |
t6 | Screw (Type B) | 3 | |
t7 | Screw (Type C) | 8 |
REQUIRED TOOLS:
•Tight Fitting gJovee
•Standard screwdriver
•Phillips screwdriver
•Pliers
•Sharp knife
•
•
•Tape measure
•Electric drill
•
INSTALLATION
Pick a location that will allow the air conditioner to bIow the cold air into the area you want. Windows used for installation must be strong enough to support the weight of the air conditioner. Good installation with speciaI attention to the proper
position of the unit will lessen the chance that service will be needed.
When cooling more than one room, installation location is very important. To cool your rooms, cold air must be blown from the air conditioner in a straight path.
HORIZONTAL SLIDING
WINDOW INSTALLATION
_1 Loosely attach the Support Bracket to the bottom of Bracket using Bolts, Washer, and Nuts. Attach the Leveling bolt and nat. (Fig. 1)
Bracket
Leveling Bolt & Nut
FIG. 1
_ Remove protective backing from Window Track Seal and apply seal to window track. (Fig.2)
_m Measure and lightly mark a line
from window jamb. Center the Support Bracket assembly on the window track and fasten with 4 Type C screws.(Fig. 2)
FIG. 2