![](/images/new-backgrounds/1272119/27211923x1.webp)
1.2 HEADPHONE JACK
The headphone jack is located in front at the left end of the key slip. Use a headphone with a standard stereo 1/4 inch phone jack.
1.3REAR PANEL
1.OUTPUTS -FIXED-
R, L OUTPUTS
The R, L outputs are used to connect the MP8II to a musical instrument amplifier using XLR Terminals. The R, L outputs can also be used to connect the MP8II to a PA system or recording console. The (Master) VOLUME fader and the EQ settings DO affect these outputs.
GROUND LIFT SW
With this switch ON, a possible ground loop can be shut from an external machine which is connected to your MP8II with XLR terminal. Usually, you may leave the switch to its OFF position.
2. OUTPUTS -Normal-
R, L/MONO OUTPUTS
The R, L/MONO outputs are used to connect the MP8II to a musical instrument amplifier using standard 1/4 inch phone jacks. The R, L/MONO outputs can also be used to connect the MP8II to a PA system or recording console. The EQ settings DO affect these outputs.
3.FOOT CONTROLLERS
EXP JACK
An expression pedal can be connected to this jack.
The expression pedal can be assigned to different MIDI control numbers or functions in the Menu.
FSW JACK
A momentary footswitch can be connected to this jack (EX: KAWAI
4. DAMPER / SOFT JACK
This jack is used to connect the Foot Pedal included with the MP8II (KAWAI
5. MIDI JACKS
These jacks are used to connect the MP8II with external MIDI devices such as a MIDI sound module or a MIDI sequencer.
12