Kawai MP8II manual Store, Storing the settings as a Sound, EFX/REVERB settings see page25

7. STORE

You can save the changes of the settings made as either a SOUND or a SETUP.

Up to 256 SOUNDs or 256 SETUPs can be stored.

Moreover, the Common parameters can also be stored as the initial setting in

SOUND mode.

The following groups of parameters are stored.

[SOUND]

Selected Zone’s One Sound settings:

EFX/REVERB settings ( see page25 )

Control Knob settings -except for EQ ( see page27 ) Int Zone parameters in MENU settings ( see page32 ) -except for parameters with the inverse “S(Setup)” icon

[COMMON]

Initial settings in SOUND mode:

Function SW setting ( see page21 )

COMMON parameters in MENU settings ( see page32 ) -except for parameters with the inverse “S(Setup)” icon

[SETUP]

MP8II’s whole settings of 4zones:

Sound Selection, Zone On/Off Status ( see page15 )

EFX/REVERB settings ( see page25 )

Fader, Control Knob settings ( see page17, page27 )

Function SW setting ( see page21 )

MASTER TRANSPOSE setting ( see page18 )

All MENU settings ( see page32 )

7.1 Storing the settings as a SOUND

While in SOUND mode, press the STORE button. The display will show the following screen:

Press the VALUE UP button, the display will show the following screen:

Press the VALUE UP button to confirm. The STORE procedure can be cancelled at any time by pressing any other button which is not used during the STORE procedure.

Note:

Storing will overwrite the selected SOUND.

If the selected zone is external, the SOUND cannot be stored.

43