17. | ROTARY 1 | rate | slow/fast | wet balance |
18. | ROTARY 2 | rate | slow/fast | drive |
19. | AUTO WAH | sense | 0 | wet balance |
20. | PEDAL WAH | sense | 0 | wet balance |
21. | ENHANCER | intensity | 0 | send level |
22. | OVERDRIVE | drive | 0 | wet balance |
REVERB parameter list
|
| REVERB Time | REVERB Depth | |
1. | HALL 1 | rev.time | 0.3 - 5.0S | send level |
2. | HALL 2 | rev.time | 0.3 - 5.0S | send level |
3. | STAGE 1 | rev.time | 0.3 - 3.0S | send level |
4. | STAGE 2 | rev.time | 0.3 - 3.0S | send level |
5. | ROOM 1 | rev.time | 0.3 - 3.0S | send level |
6. | ROOM 2 | rev.time | 0.3 - 3.0S | send level |
7. | PLATE | rev.time | 0.3 - 3.0S | send level |
Note:
When EFX/REVERB depth is set to 0 while the EFX/REVERB button is active, the EFX/REVERB button will blink to indicate that the EFX/REVERB is turned ON but the depth is set to 0.
EFX rate and REVERB time are effective to internal zone only.
If the selected zone is set to BOTH, changing the value for EFX depth or REVERB depth affects for both internal and external sections. If you want different settings for internal and external sections, first enter the edit mode by pressing the MENU button and press the EFFECT button. Now you can select internal or external zone with ZONE SELECT button. (See page33 for details.)
Quick Change Reverb Offset
Press and hold the EFFECT button. The EFFECT button starts blinking
and the following screen for Reverb Offset (See page47) will be shown until the button is released.
This parameter is stored automatically when leaving the screen, there is no need to store the setting manually.
28
