S E R V I C E I N S T R U C T I O N S
www.keatingofchicago.com |
MOUNTING INSTRUCTIONS FOR REPLACING
HI-LIMIT CONTROL #004341 (BACK MOUNT)
WITH #034357 (BOTTOM MOUNT)
FOR IFM & GAS FRYERS & PASTA COOKERS
1.Line up template with reset button clearance hole in bottom of control panel back. Hold in place & mark hole centers.
2.Drill (2) Ø0.201 (#7) holes.
3.Drill (1) 0.413 hole.
4.Install new
FRONT VIEW OF FRYER OR PASTA COOKER
WITH CONTROL PANEL REMOVED
TEMPLATE
Align the center hole of the template below with the existing reset button hole in the control panel back. Drill the 3 needed holes. See View
CONTROL PANEL
BACK REF.
LINE UP TEMPLATE ON EXISTING HOLE AS SHOWN.
DRILL (2) .201 #7 HOLES AND (1) .413 "Z"
0.201
DRILL (2) #7LINE UP WITH EXISTING HOLE
WHEN REPLACING 004341
WITH 034357
PART |
|
#004341 | Remove wires as shown |
| and replace on 034357 |
| as shown |
0.413 "Z" SIZE |
VIEW
(BOTTOM VIEW)
PART
#034357
HI-LIMIT RESET BUTTON
If the
The red button is located under the control panel.
PART #031112 | REV 2 | DATE: 12/13/06 | 5/98 |
|
|
| HiLmtCntrl |