Keating Of Chicago 004341 HI-LIMITCONTROL #025584 BACK MOUNT, Mounting Instructions For Replacing

S E R V I C E I N S T R U C T I O N S

www.keatingofchicago.com 1-800-KEATING

MOUNTING INSTRUCTIONS FOR REPLACING

HI-LIMIT CONTROL #025584 (BACK MOUNT)

WITH #034357 (BOTTOM MOUNT)

FOR IFM & GAS FRYERS & PASTA COOKERS

1.Line up template with reset button clearance hole in bottom of control panel back. Hold in place & mark hole centers.

2.Drill (2) Ø0.201 (#7) holes.

3.Drill (1) 0.413 hole.

4.Install new hi-limit control using (2) #8-32 x 1/4” screws (part #017744).

TEMPLATE

Align the center hole of the template below with the existing reset button hole in the control panel back. Drill the 3 needed holes. See View A-A.

FRONT VIEW OF FRYER OR PASTA COOKER

WITH CONTROL PANEL REMOVED

CONTROL PANEL

BACK REF.

LINE UP TEMPLATE ON EXISTING HOLE AS SHOWN. DRILL (2) .201 #7 HOLES AND (1) .413 "Z"

0.201

DRILL (2) #7LINE UP WITH EXISTING HOLE

WHEN REPLACING 025584
WITH 034357				0.413 "Z" SIZE
PART
#025584			VIEW A-A
			(BOTTOM VIEW)
	and replace on 034357		HI-LIMIT RESET BUTTON
	Remove wires as shown
	as shown
			If the Hi-limit has been activated, press the red button
	PART		to reset after the oil cools.
	#034357
			The red button is located under the control panel.
PART #031112	REV 2	DATE: 12/13/06		5/98
				HiLmtCntrl