INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■Pliers (that open to 1⁹⁄₁₆" [39.5 mm])
■Flashlight (optional)
Tools needed for installation
■Open end wrenches 17 mm and 13 mm
■Level
■Wood block
■Ruler or measuring tape
Parts supplied
AB
C
DE
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E. Beaded strap
Alternate Parts
Parts listed are available from your local Sears store or Sears Service Center. For further information, please call
1-800-4-MY-HOME® (1-800-469-4663).
If You Have | You Will Need to Buy |
Laundry tub or | Sump pump system (if not already |
standpipe taller | available) |
than 96" (2.4 m) |
|
|
|
Overhead sewer | Standard 20 gal. (76 L), 30" (76.2 cm) tall |
| drain tub or utility sink and sump pump |
| (available from local plumbing suppliers) |
|
|
Floor drain | Siphon break, Part Number 285834; |
| additional drain hose, Part |
| Number 8318155; and connector kit, Part |
| Number 285835 |
|
|
Drain hose too | 4 ft (1.2 m) drain hose extension kit, |
short | Part Number 285863 |
|
|
Water faucets | 2 longer water fill hoses: |
beyond reach of fill | 6 ft (1.8 m) Part Number 76314, |
hoses | 10 ft (3.0 m) Part Number 350008 |
|
|
Options
Pedestal
You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (25.4 cm) or a 15.5" (39.4 cm) pedestal. Remember that the pedestal will add to the total height of the washer.
AB
A.10" (25.4 cm) pedestal
B.15.5" (39.4 cm) pedestal
This pedestal (with storage drawer) is available in several colors.
To order, call your local Sears store. For further information, please call
Pedestal | Approximate | Color | Part |
Height | Height with |
| Number |
| Washer |
|
|
|
|
|
|
10" (25.4 cm) | 48" (122 cm) | White | 46822 |
|
|
|
|
15.5" (39.4 cm) | 53" (135 cm) | White | 57822 |
Stack Kit
Are you planning to stack your Kenmore washer and dryer? To do so, find the stack kit (8541503) in the drum of the matching Kenmore dryer. Follow instructions included with the kit. See “Location Requirements.”
5
