Kenmore 110.6707, 110.6706, 110.6705 manual Dryer USE, To make changes during an Auto Dry Cycle

DRYER USE

STATUS	MODIFIERS		OPTIONS
_mp
			Drum	Light
C®l Down		;gh
v_/rin_Guargl	0	L_w
			Wrinkle	Guard 90
b	_mal	E×_ Low
CheeklintScr_n_			[ovd
			So_
Dryness TernDe_ature			Dy¢le Signal Volume

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything flammable on it (even after washing).

Failure to follow these instructions can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

This booklet covers several different models. Your dryer may not have all of the cycles and features described.

Follow these basic steps to start your dryer. Please refer to specific sections of this manual for more detailed information.

1.Clean lint screen before each load. See "Cleaning the Lint Screen."

2.Place laundry into dryer and shut door.

3.Press POWER.

4.Turn the cycle selector knob to the desired cycle. The preset settings for Auto Dry Cycles or Timed Cycles will illuminate. The estimated (Auto Dry Cycles) or actual (Timed Cycles) cycle time (in minutes) will show in the display.

NOTE: A default time is displayed when an Auto Dry Cycle is selected. During the first few minutes of the drying process, the cycle time may automatically vary from the default time based on the size and fabric type of the load. Toward the end of the drying process, the estimated time display will adjust again, showing the final drying time.

To make changes during an Auto Dry Cycle:

• Press STOR

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death or fire.

To use an Auto Dry Cycle

•Press POWER.

Select an Auto Dry Cycle.

•Select DRYNESS LEVEL to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level.

The default dryness setting is Normal when an Auto Dry Cycle is selected. You can select a different dryness level, depending on your load, by pressing DRYNESS LEVEL and choosing More, Normal or Less. Selecting More, Normal or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.

•Select the desired Options.

18