INSTALLATION INSTRUCTIONS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed:.

Parts listed are available from your local Sears store or Sears Service Center. For further information, please call

1-800-4-MY-HOME® (1-800-469-4663).

If You Have

You Will Need to Buy

Flat-blade screwdriver

Adjustable wrench that opens to 1" (2.5 cm) or %6" open-end wrench (for adjusting dryer feet)

Pliers that open to 1%6" (3.95 cm)

_A" nut driver or socket

wrench (recommended)

Tin snips (new vent installations)

Parts supplied:

Caulking gun and compound (for installing new exhaust vent)

Knife

Vent clamps

Wood block (for leveling)

Level

Tape measure

Laundry tub or

Sump pump system (if not already

standpipe

taller than

available)

 

 

96" (2.4 m)

 

 

 

 

1" (2.5 cm) diameter

2" (5 cm) diameter

to

1" (2.5 cm)

standpipe

 

diameter

standpipe

adapter, Part

 

 

Number

3363920

 

 

Overhead

sewer

Standard

20 gal. (76 L) 34" (86.4 cm)

 

 

tall drain tub or utility sink and sump

 

 

pump (available from local plumbing

 

 

suppliers)

 

 

Floor drain

 

Siphon break, Part Number 285320,

 

 

additional drain hose, Part Number

 

 

285702 and connector

kit,

Remove parts package from the washer basket. Check that all parts were included.

 

 

 

G

 

 

 

A. Water inlet hoses (2)

E. Plastic

strap

 

 

B. Inlet hose flat

washers (4)

R Drain

hose

 

 

C. Rear leveling

legs

(2)

G. Yellow, single wire

hose

clamp

D. Front leveling

legs

(2)

H. Silver,

double-wire

hose

clamp

 

 

Part Number

285442

 

Drain hose

too short

Drain hose,

Part Number

285664 and

 

 

connector kit, Part Number 285442

Lint clogged

drain

Drain protector,

Part Number 367031

Water faucets

2 longer

water

fill hoses:

 

beyond reach of fill

6 ft (1.8

m) Part Number

76314,

hoses

 

10 ft (3.0 m) Part Number

350008

Parts needed:

Check local codes, electrical supply and venting, and read "Electrical Requirements" and "Venting Requirements" before purchasing parts.

Mobile home installations require metal exhaust system hardware available for purchase from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME® (1-800-469-4663).

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything flammable on it (even after washing).

Failure to follow these instructions can result in death, explosion, or fire.

You will need

A location that allows for proper exhaust installation. See "Venting Requirements."

A 120 volt, 60 Hz., AC only, 15- or 20-amp circuit.

A grounded electrical outlet located within 2 ft (61 cm) of either side of the laundry center. See "Electrical Requirements."

Page 5
Image 5
Kenmore 110.88732 Tools needed, MY-HOME If You Have You Will Need to Buy, Parts supplied, Parts needed, You will need