Oyce a sd S%mpe al{ uss{ ps

Select the correct cycle and temperature for your load.

Drying tips

Follow care label directions when they are available.

If you use fabric softener sheets, use only ones labeled as dryer safe. Follow package instructions.

Remove the load from the dryer as soon as tumbling stops to reduce wrinkling. This is especially important for permanent press, knits, and synthetic fabrics.

Cycle and temperature tips

Dry most loads using the Normal Dry setting (*).

Use a More Dry setting for drying heavyweight items such as towels and work clothes.

Use a Normal Dry setting for drying medium weight items, such as sheets, underwear, permanent press fabrics, and some knits.

Use a Less Dry setting for drying lightweight items such as lingerie, blouses, dresses, and some knits.

Use a no heat (air) setting for rubber, plastic or heat-sensitive fabrics.

Line dry bonded or laminated fabrics.

If you are unsure of the temperature to select for a load, select a lower setting rather than a higher setting.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

If the load is not as dry as you like, complete drying using the Timed Dry cycle. The next time you dry a similar load, select a setting closer to MORE DRY.

NOTE: Drying time with an automatic cycle varies according to the type of fabric, size of load, and temperature setting. See "Drying, Cycle and Temperature Tips."

Timed Dry

Use this cycle to complete drying if items are still damp after the Auto Dry II cycle. Timed Dry is also useful for heavyweight and bulky items, such as bedspreads, work clothes, and large loads that require a long drying time. Use this cycle to get up to

110 minutes of heated drying time. The heating cycle is followed by a 10-minute (approximately) cool down period.

Touch Up

Use this cycle to smooth synthetic and permanent press clothes that are clean but wrinkled from being crowded in a closet or suitcase. This setting provides approximately 10 minutes of heated tumbling followed by a 10-minute (approximately) cool down period. Remove clothes immediately when tumbling stops.

Air Dry

Use the Air Dry cycle for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This chart shows examples of items that can be dried using an air cycle.

 

Type

of Load

Minutes*

Foam rubber--pillows,

padded bras, stuffed toys

20

- 30

Plastic--shower

curtains, tablecloths

20

- 30

Rubber-backed

rugs

 

40

- 50

AUTO DRY l

MORE DRY --

NORMAL DRY

Olefin, polypropylene, sheer nylon

10 - 20

--LESS DRY

OFF

110

1o

_o

TOUCH UP-

6o 0o TIMED DRY

Auto Dry II

Use this cycle to dry most loads. Dryness is determined by thermostats that react to the amount of moisture in the air

exhausted from the dryer. Moist air indicates clothes are damp. Dry air indicates that moisture has been removed.

This cycle includes a 10 minute (approximately) cool down period at the end of the cycle to make clothes easier to handle and reduce wrinkling.

Dry most loads using the Normal Dry (*) setting. When the cycle ends, check the dryness of the load.

If the load is drier than you like, select a setting closer to LESS DRY the next time you dry a similar load.

*Reset time as needed to allow items to dry completely.

When using Air Dry

Check to see that coverings are securely stitched.

Shake and fluff pillows by hand periodically during the cycle.

Dry item completely. Foam rubber pillows are slow to dry.

End of Cycle Signal

Your dryer sounds a signal when a drying cycle is finished.This signal is helpful when you are drying items that need to be removed as soon as the dryer stops in order to prevent wrinkles.

17

Page 17
Image 17
Kenmore 110.88732 manual Touch UP