Kenmore 110.2405#, 110. 2404#, 110.2403# manual Normal, Handwashplus, Finedelicates

How CATALYST _ Cleaning Action works

1.Before agitation begins, detergent is automatically released into a special chamber that mixes the detergent with a small amount of water to create a sudsy cleaning solution.

2.Spinning spreads out the clothes.

3.The cleaning solution showers onto the top of the fabrics. The solution is pulled through the clothes, and the detergent enzymes attach to soils and stains, lifting them away.

4.Thewasherfillstotheselectedwaterlevelandcompletesthe selected cycle.

NOTES:

•For best results, the load should be dry at the star[ of the cycle.

•Stubborn and set-in stains might require additional pretreatment.

Ultra Clean cycle

Use this cycle for most loads to get between 6 and 15 minutes of wash time. For heavily soiled clothes, select the CATALYST'_

Cleaning Action cycle and the Heavy Duty speed setting.

Permanent Press I cycle

A load cooling spray rinse reduces wrinkling. Use this 8- to 10-minute cycle for cleaning lightly to moderately soiled permanent press blends and synthetic fabrics. Choose a slow spin speed control setting such as Delicate to help reduce wrinkling.

Handwash cycle

Use this 4-minute cycle for hand washable garments and select one of the Handwash Speed Select settings for the best fabric care. The use of a detergent specially formulated for the Handwash cycle is recommended.

Whitest Whites

Use this wash cycle for loads of white fabrics that need improved whitening. For the best soil and stain removal, select the blue oval labeled CATALYST® on the Cycle Selector Control (Timer) knob and the Heavy Duty setting on the Speeds selector knob. Bleach is recommended in this cycle to provide outstanding whitening. Wash time is approximately 19 minutes.

Soak cycle

This cycle features agitation followed by soak time to help remove heavy soils and stains that need pretreatment. The washer will drain when the Soak cycle ends. The Soak cycle should be followed by an Ultra Clean or Permanent Press cycle with additional detergent.

NOTE: Hot water is not recommended for soaking. It may set some stains. If using the CATALYST SCleaning Action, use of the SOAK cycle is not needed.

This section describes the wash/spin speeds you can select with

the Speeds control. Each speed setting is designed for different types of fabric and soil levels.

DEUCATE	NORMAL
$LOWI SLOW	SLOWI FAST
€ID	G_
HANDWASH	o HEAVYDUTY
CASUAL
Ex'mASLOW/ SLOW	FAST/ FAST
91D	O
HANDWASHPLUS	HANg DRY
FINEDELICATES	F/L_-/r SLOW
IN_RMI_ENT
B('rRASLOWI SLOW

Speeds Selector knob

Normal speed

This speed setting is for normally soiled cottons and linens. Setting combines slow speed agitation and fast spin speeds to shorten drying time.

Heavy Duty speed

This speed setting is for sturdy or heavily soiled loads. Setting combines fast speed agitation and fast spin speeds. For best results, use this setting when the Cycle Selector Control (Timer) knob is set on the CATALYSTe setting.

Hang Dry speed

This speed setting is for sturdy permanent press fabrics that will be line dried. Setting combines fast speed agitation and slow spin speeds to reduce wrinkling.

Handwash Plus Fine Delicates speed

Use this speed setting for hand washable and special-care items. The wash action has repeating periods of extra-slow speed agitation and soaking. Slow spin speeds help reduce wrinkling.

NOTE: Do not use this cycle for large items such as blankets. Some "Hand Wash" items, particularly wool, naturally shrink when washed. When still wet, block these items by gently stretching to original measurements. Allow the items to dry flat.

Handwash/Casual speed

This speed setting is for lingerie and loosely knit items. Setting combines extra-slow speed agitation for gentle soil removal and slow spin speeds to reduce wrinkling.

Delicate speed

This speed setting is for washable knit fabrics and permanent press fabrics. Setting combines slow speed agitation for gentle soil removal and slow spin speeds to reduce wrinkling.

13