Kenmore 116.23637C Poorjob ofdid pick-up, Cleanerwontstart, Burned o Jtlightbulb 1.Dirtypowercord

• _ _ _ i_! !lm

Review this table to find do-it-yourself solutions for minor performance problems. Any service needed, other than those described in this owner's manual, should be performed by an autho- rized Sears Service Center.

Cleanerwon'tstart.

Poorjob ofdid pick-up.

Cleanerstartsbut cutsoff.

Power-Mate willnot

Nn whenattached.

Cleaner picksup moveable rugs-or- Power-Mate" pushestoohard.

Ught won'twork.

Cordwon'trewind.

Cleanerleavesmarks

oncarpet.

1, Unplugged at wall outlet.

2.Trippedcircuit breaker/blownfuse at household service panel.

3.Loose hose electrical connections.

4.Trippedthermal protector in canister.

1.Full or clogged dust bin.

2.Clogged airflow passages.

3.Dirty filters.

4.Wrong pile height setting.

5.Open suction controL.

6.Hole in hose.

7.Worn Power-Mate® agitator.

8.Worn or broken belt.

9.Dirty brush or brush supports.

1.Hose electrical connections.

2.Trippedoverload protector in PoweroMate,.

3.Tripped thermal protector in canister.

1.Power-Mate" connections

unplugged.

2.Worn or broken belt.

3.Dirty agitator or agitator supports. 4, Tripped overload protector in

Power-Mate*

1.Wrong pile height setting.

2.Suction toostrong.

1.Burned o_Jtlightbulb.

1.Dirtypowercord.

2.Cord jammed.

1.Wrongvacuumingpattern.

1.Plugin firmly,pushON/OFF switch to ON.

2.Reset circuit breaker or replace fuse.

3.Reconnecthose ends,(page 7)_

4.Reset thermalprotector, (page 11).

1.Empty dust din, (page 13).

2.Clearairflow passages, (page 12).

3.Clean!changefilters, (page 14, 15).

4.Adjust setting, (page 8, 9).

5.Adjustcontrol, (page 11).

6.Replace hose.

7.Change agitator, (page 18).

8 & 9. See BELT CHANGINGAND AGITATOR CLEANING,(pages 16, 17).

1.Check connections,reconnecthose ends, (page 7).

2.Remove any items that may be caught or jammed, then reset. If cleanerstarts and stops again, clean agitator and agitator supports, then reset, (pages 11, 16-17).

3.Reset thermalprotector, (page 11).

1.Plug in firmly,(page6).

2&3. See BELTCHANGING AND AGITATOR

CLEANING,(pages 16-17).

4.Check brush area for excessivelint build-up orjamming. Clean agitator and agitator supports, then reset,

(pages 11, 16-17).

1.Adjust setting, (page 8, 9).

2.Open suctioncontrol,(page 11).

1. Changelightbulb,(page 18).

1.Clean the powercord.

2.Pulloutcordandrewind.

1.See VACUUMINGTIPS, (page9).

19