TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacu- um, the agitator must be cleaned every time the belt is chart eqe#_d.
The agitator must also be cleaned accord- ing to the following schedule:
Vacuum | Use | Clean | Agitator | |
HEAVY | - |
| every | week |
(used | daily) |
|
| |
MODERATE | - | every | month | |
(used | times/week) |
|
| |
LIGHT | - |
| every | 2 months |
(used | 1time/week) |
|
| |
TO REPLACE BELT
1.Install new belt over motor drive, then over brush sprocket.
NOTE: See
PARTS AND FEATURES for belt number.
End Cap
Agitator
assembly back m into
Agitator Assembly
Brush Unit
End Cap i
L_ Belt Pulley
3. Reinstall agitator cover by lin- ing up the front tabs and slots and rotating downward until the
latches snap into
Cover
5.Rotate cover back. Press
cover firmly until side and rear tabs snap
into place. Turn
upside down and replace two
(2)cover
screws.
Tabs
Agitator Cover
place.
4. Line up front of cover and base. Rest cover on front edge of base as
Baseshown.
17
