Kenmore 116.24614 owner manual Canister, Hood And Tool Storage Cover, Hose, To Install

CANISTER

1.Open the canister hood,

2.Check to see that the dust bag is proper-

ly installed. See BAG CHANGING for instructions.

3. Check to see that the motor safety filter is

properly installed. See MOTOR SAFETY FILTER CLEANING for instructions.

HOOD AND TOOL

STORAGE COVER

It is normal for the canister hood and tool storage cover to come off when opened fur- ther than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstall.

HOSE

1.Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place,

To remove: Lift hose latch tab

upward and pull up on hose.

Lock

Hose

Latch

Tab

Notch

2.Insert han- dle into wand until lock but-

ton snaps in place. Be sure hose is not twisted.

CAUTION

Never open canister hood with the tool storage cover open. This will help to prevent damage from occurring to the canister hood and/or tool storage cover.

This canister is equipped with an on-board storage area for a Power-Mate Jr. ® attach- ment.

To Install:

Open the Power-Mate Jr." storage cover. Insert the Power-Mate Jr.", press down into place, and close the lid securely.

To Remove:

Open the storage cover. Remove Power- Mate Jr. ® from the storage area and use as needed (see ATTACHMENTS and ATTACH- MENT USE).

_._	To remove:
	Press	handle
Han_e	quick	release
Ou_k	button	and

pull up on handle.

To store: Disconnect hose from wands and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed.

Power-Mate Jr._

Storage Cover

7