Kenmore 116.29912 q=, Exhaust Filter, Hepa, Fire and/or Electrical Shock Hazard, _,,,_

WARNING .......

Fire and/or Electrical Shock Hazard

Do not operate with a clogged exhaust filter or without the exhaust filter or exhaust filter cover installed.

i ii iiii

EXHAUST FILTER

HEPA

The exhaust filter cartridge must be replaced when dirty. Replace the filter when the entire surface area is covered evenly. The filter CANNOT be washed as it will lose its dust trapping ability.

NOTE: Use exhaust filter #20-86882. In Canada, #20-86882C_

				2. Slightly		push
				the exhaust			filter
Exhaust				cartridge		to	the
				side, as shown in
				the	illustration,
				and	pull	up	to
				remove.
3. Replace			the	._,,,_\\
exhaust		filter car-		q=,,
tridge,	carefully			Exhaust
positioning			it so	Filter.
that the side
shown	in the
illustration goes
down	under		the
ribs.	Then		push
the other		side

1. Pull up on
the exhaust fil-
ter cover	to
remove	from

Exhaust _ _ I

Filter =./" J

down until it snaps into place,. Place the new filter into the motor cover with the grey

edge down.

the	motor cover
and	lay aside°

Exhaust_"_-._

Filter Cove__

To.

4.Replace the exhaust filter

cover by engag-

ing the two tabs on the rear and

pushing down in front until it

snaps closed_

Always follow alt safety precautions when cleaning and servicing the Power-Mate ® .

! WARNING

,, ,i i,i1,,,

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before

servicing or cleaning the unit.

Failure to do so could result in elec-

trical shock or personal injury from cleaner suddenly starting.

, ,''IHHI

17