Kenmore 116.29912 owner manual To Check Agitator, To Replace Agitator Assembly

WARNING

,, i ii,

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit° Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.

TO CHECK AGITATOR

ASSEMBLY

__ When brushes

level of the base

support bars,

repface the

___._are worn to the agitator

assembly.

Base Support Bars

TO REPLACE AGITATOR ASSEMBLY

1, Remove Power-Mate ® cover, agitator cover, belt and agitator assembly. See "To Remove Belt" in BELT CHANGING AND AGITATOR CLEANING.

2.Remove end caps, washers, screws, end brush, and brush sprocket pieces from ends of old agitator assembly

3, Reassemble agitator assembly. To line up screw holes in dowel, sprocket and end brush, be sure all of the brush sprocket pieces align properly. See AGITATOR ASSEMBLY,

4.Reinstall belt, agitator assembly, agitator cover and Power-Mate ® cover. See "To

replace belt" in BELT CHANGING AND AGITATOR CLEANING.

End

BrushEnd

Screw

End		Screw
		Washer
Cap	Agitator Unit
		Brush Sprocket

20